WebSite 
RFID Module
    • JMY501
    • The module and antenna are separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm. The interface is UART & IIC. The module supports series IC cards according to ISO14443A, ISO14443B, ISO15693 and the Mifare series. And also it supports auto detecting card.
    • JMY502
      More
    • JMY502
    • The module and antenna are separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm. The interface is UART & IIC. The module supports the Mifare series cards. And also it supports auto detecting card. The designer combined some frequent used command of RF card. So the operation is simple, but the function is powerful.
    • JMY502
      More
    • JMY503
    • JMY503 is the high performance and low-power dissipation RFID Module. The module and antenna are separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm. The interface is UART & IIC. The module supports the Mifare series cards. And also it supports auto detecting card.
    • tubiao
      More
    • JMY504
    • JMY504 series are the high performance and low cost RFID Module. And the module and antenna are separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm. The interface is UART & IIC. The module supports series IC cards according to ISO14443A, ISO14443B and the Mifare series. And also it supports auto detecting card.
    • More
    • JMY505
    • The module and antenna are separate design. 50ohm coaxial line are linked the antenna and module. Normally the wire should be between 60cm and 100cm; the Max. 10m. The interface is UART & IIC. The module supports series IC cards according to ISO14443A, ISO14443B, ISO15693 and the Mifare series. And also it supports auto detecting card.
    • More
    • JMY506
    • The module and antenna are separate design. 50ohm coaxial line are linked the antenna and module. Normally the wire should be between 60cm and 100cm; the Max. 10m. The interface is UART & IIC. The module supports series IC cards according to ISO14443A, ISO14443B and the Mifare series. And also it supports auto detecting card.
    • More
    • JMY601
    • The EMC of the module (with four layers PCB) is excellent. The interface is UART (RS232 in TTL level). The module supports series IC cards according to ISO14443A, ISO14443B, ISO15693 and the Mifare series. And also it supports auto detecting card. The JMY601 series support fully all kinds of contactless IC cards.
    • More
    • JMY602
    • The module and antenna are integrated design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The interface is IIC, UART, RS232 and USB. The module supports series IC cards according to ISO14443A, ISO14443B, ISO15693 and ISO7816(T=0 & T=1).
    • JMY502
      More
    • JMY603
    • The interface is UART(RS232 level). The module supports series CPU cards according to ISO14443A, ISO14443B and Mifare 1K & Mifare 4K etc. It has already been authenticated by the Bank Card Test Center under ISO10373-6.
    • JMY502
      More
    • JMY604
    • The interface is UART(RS232 level). The module supports series CPU cards according to ISO14443A, ISO14443B and Mifare 1K & Mifare 4K etc. The antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. It has already been authenticated by the Bank Card Test Center under ISO10373-6.
    • tubiao
      More
    • JMY607
    • The interface is UART & IIC and RS232C. The module supports series IC cards according to ISO14443A, ISO14443B, ISO15693 and the Mifare series. And also it supports auto detecting card. The designer combined some frequent used command of RF card. So the operation is simple, but the function is powerful.
    • JMY502
      More
    • JMY608
    • JMY608 is the module version of MR760R&W. JMY608 is the module with USB interface (HID standard). In the systems of Windows, Linux and other PC systems support USB keyboard, the module imitates the USB keyboard to operate the card data. The module supports series IC cards according to ISO15693. And it can set freely read-only the serial number or the data of the card.
    • JMY502
      More
    • JMY609
    • JMY609 is the module version of MR761R&W. JMY609 is the module with USB interface (HID standard). The module imitates the USB keyboard to operate the card data. The reader supports series IC cards according to ISO14443A, ISO14443B, ISO15693 and ISO7816 (T=0 & T=1). There are 2 SAM card slots in the module.
    • tubiao
      More
    • JMY610
    • 50ohm coaxial line are linked the antenna and module. Normally the wire should be between 60cm and 100cm; the Max. 10m. The MCU of JMY610 is ARM7. The module supports series IC cards according to ISO14443A, ISO14443B, and ISO15693. There are 4 SAM card slots in the reader. JMY610 series support PPSS set.
    • More
    • JMY611
    • The antenna and module are the split design. And the MCU of JMY611 is MCS51. The module supports series CPU cards according to ISO14443A, ISO14443B and also 20 kinds of cards contain Mifare 1K. It has already been authenticated by the Bank Card Test Center under ISO10373-6. There are 1 SAM card slot in the reader. JMY611 series support PPSS set.
    • More
    • JMY612
    • 50ohm coaxial line is linked the antenna and module. Normally the wire should be about between 60cm and 100cm; Max. 10m. The module supports series CPU cards according to ISO14443A, ISO14443B and also 20 kinds of cards contain Mifare 1K. There are 4 SAM card slots in the reader. JMY612 series support PPSS set.
    • JMY502
      More
    • JMY680
    • The module and antenna are integrated design. Ferrite materials are used between the module motherboard and antenna. This design applies for the environment which has more metal materials around the reading scope. The interface is UART & IIC and RS232C and USB. The module supports series IC cards according to ISO14443A, ISO14443B , ISO15693 and ISO7816(T=0 & T=1).
    • JMY502
      More