JINMUYU ELECTRONICS CO., LTD. BEIJING CHINA

The series of MR701 RF reader make use of PHILIPS's SL RC400; MF RC500; MF RC531 and CL RC632 for PCD, Its can read and write contactless cards that compliant with the standard of ISO1443 TYPE-A and TYPE-B(including double interface card), electronic label of ISO15693 and SAM card of ISO7816.

MR701SAK can read and write contactless cards that compliant with the standard of ISO14443-A and SAM card of ISO7816. And the Cheap price makes it especially apply to “payment system” in application. The card that can be operated is as follows:Mifare One S50, S70, Ultra Light，Mifare Pro, SAM card (19200bps and 38400bps)

MR701SBK

MR701SCK

MR701SGK

MR701SHK

MR600 CONTACTLESS CARD READER

MR600SAK

MR600SHK compliant with the standard of ISO14443 TYPE-A-B, electronic label of ISO15693 and SAM card of ISO7816. 512K bytes data memorizer with FLASH, Embedded with clock.

MR600SGK can read and write electronic label that compliant with the standard of ISO15693 and SAM card of ISO7816, it is a special-purpose reader for electronic label.

MR600SCK Compliant with the standard of ISO14443 TYPE-A-B and SAM cards that compliant with the standard of ISO7816.

MR600SBK is special-purpose for TYPE-B, the card that can be operated includes double interface CPU cards as SLE66CL160S, many kinds of logic encrypt card and memory card as AT88RF020, AT88RF080 and ST SRIX4K, SAM card (9600bps/38400bps) of ISO7816.

MR600SAK Compliant with the standard of ISO14443-A and SAM card of ISO7816, 512K bytes data memorizer with FLASH, Embedded with clock.

The function and MR701 are self-same, add 8 bytes LED, the real-time clock available, can show time, 512K byte FLASH data memory available.

JMY-500 series of module inlay MF RC500 or MF RC531 PCD, compliant with the standard of ISO14443-A–B, the communication interface is serial interface of TTL lever(UART) or IIC interface, the max speed of IIC interface is 400Kbps, seek the card automatically.

MT-500 is a exploitation experiment board of the JMY-500 series RF module, install the JMY-500 series module on MT-500, can control the work ofthe module through serial interface or IIC interface. There is DIP40 socket of MCS-51MCUon the board,can connect the artificial device directly.

JMY-506 can operate Mifare and double interface CPU card of TYPE-B.512 BYTE EEPRROM for storage the date.

JMY-503 is special-purpose for Mifare One S50, S70;Voltage range is 2.7-5. 5V; has reduced the consumption of the module greatly on the premise of not influencing dependability, the largest electric current happens while operating cards, only 28mA.

JMY-502 is special-purpose for Mifare One S50, S70; Acquiescence seeks the card automatically, it is convenient to use greatly; 5V supplies power, high stability and extremely low fault rate are the greatest characteristic.

JMY-501 can operate series of Mifare card，It supports all functions.the follow card can be operate :Mifare One S50，S70，Ultra Light，Mifare Pro.

JMY-680 RF MODULE

JMY-680 series of RF module can operate Mifare One and double interface CPU cards that compliant with the standard of ISO14443 TYPE-A TYPE-B and SAM card of ISO7816;Integrated design; communication interface is UART, IIC or Wiegand especially suitable for metal environments.

JMY-680W communication interface is Wiegand（26/34), It can read the sequence number of more than 30 kinds of cards.

JMY-680B can operate Mifare One and double interface CPU cards that compliant with the standard of ISO14443 TYPE-A TYPE-B and SAM card of ISO7816.The communication interface is UART or IIC.

JMY-680P can operate Mifare One, Mifare Pro and SAM card of ISO7816.

JMY-680S can operate the Mifare One and SAM card of ISO7816.

JMY-680M can operate the Mifare One S50, S70.

CHIP

MF RC500 is compliant with the ISO14443 standard, 13.56 MHz,have utilized the modulation demodulation concept of high integration, in case of not adding any additional circuit, the inside launcher can drivethe antenna directly.

MF RC530

MF RC530 is MF RC500 of the low-voltage edition, and has increased SPI interface.

MF RC531

MF RC531 increases the support to ISO14443 TYPE-B card on the basis of MF RC530.

CL RC632

CL RC632 has increased the support to ISO15693 on the basis of MF RC531.

JMY1021

A kind of chip can operate four SAM card (9600bps/38400bps ) at the same time .

CARD AND RF LOOP

MIFARE ONE

The capacity of MIFARE ONE card is 8K EEPROM, divided into 16 sectors, each sector is 4 cake, each cake is 16 bytes, each card has the only sequence number, is 32, there is function of wallets.

AT88RF020

AT88RF020 is RFID card of 13.56KHz for second generation that ATMEL Company produced, compatible ISO14443 TYPE-B standard.

ABNORMITY CARD

Various kinds of styles ,Encapsulated the chip with EM,MF, Temic, ATMEL, ST, TK.

ELECTRONIC LABEL

Encapsulation chip with MF Hitag1, Hitag2, ST176, Ultra light.

RF CIRCLE

RF circle with 125KHz,134.2 KHz, 13.56M KHz.

DEVELOPBOARD

JMY-101

JMY-201 uses MCS-51 MCU makes the controller and finishes drive the EPSON M150II/M160 series miniature needle type print head.

The series of Developboard use MCS-51 MCU to make the controller to accomplish drive with the RC500, can read and write RF card (Mifare one), and there are very few resources (RAM) occupied, only the 19 bytes; use RS232 and PC link to each other; read and write the card through run DEMO procedure that operate at the computer; we offered two sets of completely same functions with the source code of C51 and A51.

JMY-106 Use the MCS-51 make controller to complete drive with the RC 530, the communication interface is the SPI that chip of edition must upward with the RC530, and the parallel interface reduced the link-line compare with before, its make the set line of the electrocircuit board more easy, the performance of the electromagnetism compatibility of the electrocircuit board more perfect. JMY-105 Support the card is Mifare One and Mifare Pro。

JMY-105 Use the MCS-51 make controller to complete drive with the RC 530, the communication interface is the SPI that chip of edition must upward with the RC530, and the parallel interface reduced the link-line compare with before, its make the set line of the electrocircuit board more easy, the performance of the electromagnetism compatibility of the electrocircuit board more perfect. MY-105 Support the card is Mifare One。

JMY-104 Includes three kinds of cards that applicable to payment system: RF card, CPU card and hardware circuit of high speed SAM card;Can copy the source code of ground floor used directly .

JMY-103 Use MCS-51 MCU to make the controller to accomplish drive with the RC500; Can read and write SMART CARD (9600), SAM card that accord with protocol of ISO7816 (T =0).

JMY-102 Use MCS-51 MCU to make the controller to accomplish drive with the RC500, Can operate the Mifare One and Mifare Pro.

JMY-101 Use MCS-51 MCU to make the controller to accomplish drive with the RC500, can operate the Mifare One; Can be used as Mifare one read and write device.We Offered two sets of source code of C51 and A51 with same function.